Difference between revisions of "SAS2308"
(Initial creation) |
(add How to select boot device in LSI IT mode HBA SAS controller. Formatting) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | Notes on flashing SAS2308 in a Dell Precision t7610== | + | =Notes on flashing SAS2308 in a Dell Precision t7610= |
| + | ==Firmware== | ||
| − | www.supermicro.com | + | [https://www.supermicro.com/wdl/driver/SAS/LSI/2308/Firmware/IT/ www.supermicro.com - /wdl/driver/SAS/LSI/2308/Firmware/IT/] I chose PH20.00.07.00-IT.zip This .zip file contains the IT mode firmware, the ROM image and the sas2flsh.exe utility. |
| − | + | ||
| + | ==Flashing== | ||
| + | ===List=== | ||
| + | It's a good idea to record the output of this command before flashing. Sometimes you may lose the SAS address. I just snap a pic with my cellular telephone. The 'c 0' assumes you're working on the first controller. | ||
| + | |||
| + | <source lang="bash"> | ||
| + | sas2flsh -c 0 -list | ||
| + | </source> | ||
| + | ===Erase=== | ||
| + | I've seen this with `-e 5` too ??? | ||
| + | <source lang="bash"> | ||
| + | sas2flsh -c 0 -o -e 6 | ||
| + | </source> | ||
| + | ===Flash=== | ||
| + | <source lang="bash"> | ||
| + | sas2flsh -c 0 -o -f 2308T207.ROM -b MPTSAS2.ROM | ||
| + | </source> | ||
| + | ===Restore SAS address=== | ||
| + | <source lang="bash"> | ||
| + | sas2flash -c 0 -o -sasadd 500605b0XXXXXXXX | ||
| + | </source> | ||
| + | ==Miscellaneous== | ||
| + | * [https://www.youtube.com/watch?v=dJyQVLPjWbo How to select boot device in LSI IT mode HBA SAS controller] from [https://www.youtube.com/channel/UCKHE9DEep52XlmwLbZUKvyw Art of Server] | ||
Latest revision as of 09:37, 9 December 2021
Contents
Notes on flashing SAS2308 in a Dell Precision t7610
Firmware
www.supermicro.com - /wdl/driver/SAS/LSI/2308/Firmware/IT/ I chose PH20.00.07.00-IT.zip This .zip file contains the IT mode firmware, the ROM image and the sas2flsh.exe utility.
Flashing
List
It's a good idea to record the output of this command before flashing. Sometimes you may lose the SAS address. I just snap a pic with my cellular telephone. The 'c 0' assumes you're working on the first controller.
sas2flsh -c 0 -list
Erase
I've seen this with `-e 5` too ???
sas2flsh -c 0 -o -e 6
Flash
sas2flsh -c 0 -o -f 2308T207.ROM -b MPTSAS2.ROM
Restore SAS address
sas2flash -c 0 -o -sasadd 500605b0XXXXXXXX
