KF7CRU Tape Measure Yagi Antenna

Tape Measure Yagi Antena

Resources

Antennas

• TAPE MEASURE BEAM OPTIMIZED FOR RADIO DIRECTION FINDING Joe Leggio WB2HOL
• ]https://sites.google.com/site/tapemeasureantenna/ https://sites.google.com/site/tapemeasureantenna/]
• VHF 3EL Tape Measure Yagi.
• Constructing a Tape Measure Yagi Antenna For Hidden Transmitter Hunting or Fox-Hunting
• Adapting a Three Element Tape Measure Beam for Power Line Noise Hunting
• BUILDING THE WB2HOL FOXHUNTING BEAM

Attenuators

• My Offset Attenuator Project
• Build An Offset Attenuator By Joe Moell KØOV

Build

I used a short length of pipe to secure the tape in the T. Beveled the edges a bit to make it easier to start.

I used a short length of pipe to secure the tape in the T

Is this a straight enough beam element? Or should I use hose clamps. Thinking about turning it in my lathe to remove the pipe stop ridges inside to create a clear path.