Difference between revisions of "KF7CRU Tape Measure Yagi Antenna"
m |
(Added a link from Jo re: wire size for hairpin) |
||
| Line 9: | Line 9: | ||
*[http://www.arrl.org/files/file/Technology/HANDSON.pdf Adapting a Three Element Tape Measure Beam for Power Line Noise Hunting] | *[http://www.arrl.org/files/file/Technology/HANDSON.pdf Adapting a Three Element Tape Measure Beam for Power Line Noise Hunting] | ||
*[http://open-circuit.co.uk/wp/wb-yagi/ BUILDING THE WB2HOL FOXHUNTING BEAM] | *[http://open-circuit.co.uk/wp/wb-yagi/ BUILDING THE WB2HOL FOXHUNTING BEAM] | ||
| + | *[http://theleggios.net/wb2hol/projects/rdf/snif_bm.htm RDF2 YAGI WITH TAPE MEASURE ELEMENTS] Joe Leggio WB2HOL | ||
| + | |||
| + | |||
===Attenuators=== | ===Attenuators=== | ||
*[http://nt1k.com/blog/2013/my-offset-attenuator-project/ My Offset Attenuator Project] | *[http://nt1k.com/blog/2013/my-offset-attenuator-project/ My Offset Attenuator Project] | ||
Revision as of 07:00, 4 September 2015
Tape Measure Yagi Antena
Resources
Antennas
- TAPE MEASURE BEAM OPTIMIZED FOR RADIO DIRECTION FINDING Joe Leggio WB2HOL
- https://sites.google.com/site/tapemeasureantenna/
- VHF 3EL Tape Measure Yagi.
- Constructing a Tape Measure Yagi Antenna For Hidden Transmitter Hunting or Fox-Hunting
- Adapting a Three Element Tape Measure Beam for Power Line Noise Hunting
- BUILDING THE WB2HOL FOXHUNTING BEAM
- RDF2 YAGI WITH TAPE MEASURE ELEMENTS Joe Leggio WB2HOL
Attenuators
- My Offset Attenuator Project
- Build An Offset Attenuator By Joe Moell KØOV
Build
I used a short length of pipe to secure the tape in the T. Beveled the edges a bit to make it easier to start.
I used a short length of pipe to secure the tape in the T
Is this a straight enough beam element? Or should I use hose clamps. Thinking about turning it in my lathe to remove the pipe stop ridges inside to create a clear path.
