Disable ButtonTopic as it overrides rules for buttons: ButtonTopic 0
01:57:29.763 MQT: stat/2CD780/RESULT = {"POWER1":"ON"}
01:57:29.769 MQT: stat/2CD780/POWER1 = ON
01:57:40.983 MQT: stat/2CD780/RESULT = {"POWER1":"OFF"}
01:57:40.990 MQT: stat/2CD780/POWER1 = OFF
01:54:06.140 MQT: tele/2CD780/SENSOR = {"Time":"2021-08-03T01:54:06","DHT11":{"Temperature":77.0,"Humidity":18.0,"DewPoint":30.2},"ESP32":{"Temperature":126.0},"TempUnit":"F"}
00:03:50.019 MQT: stat/2CD780/STATUS10 = {"StatusSNS":{"Time":"2021-08-03T00:03:50","DHT11":{"Temperature":75.2,"Humidity":19.0,"DewPoint":30.0},"ESP32":{"Temperature":125.0},"TempUnit":"F"}}
esp32
rule1 ON BUTTON1#state DO DisplayText[zs1r1c1]State: %value% endon ; works, not as expected
rule2 on DHT11#Temperature do publish test/jeff %value% endon ; works
esp8266 D1 mini
rule1 on DS18B20#Temperature do publish test/jeff %value% endon ;works!
rule1 on DS18B20#Temperature < 80 do publish test/jeff %value% endon ;works!
DisplayText [zs1r1c1]Want GPIO 13
DisplayText [l2c1]Momentary button
DisplayText [l3c1]Normally low
DisplayText [l4c1]Push for Temp
