Difference between revisions of "BoeDuino-Bot.Net"

Latest revision as of 09:14, 6 August 2013

BoeDuinoBot.Net Dottie

BoeDuino-Bot.Net PCB Top

Note the addition of resistors and servo power switch and LED indicator added after PCB etch.

BoeDuino-Bot.Net PCB Bottom

Replaced top side battery pack with Parallax Boe-Bot Li-Ion battery pack installed below chassis main deck.

BoeDuino-Bot.Net v1.1 Front view

BoeDuino-Bot.Net v1.1 Bottom view

@@ Line 1: / Line 1: @@
-==First prototype==
+==Prototype==
-===[[ServoCentering]]===
 [[File:Dottie0.jpg|200px|thumb|none|BoeDuinoBot.Net Dottie]]
-Read this first blog post [http://www.rodaw.com/nerding/dottie-boeduinobot-net/ introducing dottie].
+===Read this first [http://www.rodaw.com/nerding/dottie-boeduinobot-net/ blog post introducing] dottie===
 ==BoeDuino-Bot.Net v1.0==
@@ Line 8: / Line 8: @@
 {{#ev:youtube|vtDHHEG7DwY}}
-==PCB Circuit board==
+==PCB Shield==
+===Prototype===
 [[File:BoeDuino-Bot.NetV1.0TopWM.jpg|200px|thumb|none|BoeDuino-Bot.Net PCB Top]]
 Note the addition of resistors and servo power switch and LED indicator added after PCB etch.
 [[File:BoeDuino-Bot.NetV1.0BottomWM.jpg|200px|thumb|none|BoeDuino-Bot.Net PCB Bottom]]
+====Read about [http://www.rodaw.com/nerding/journey-to-pcb/ PCB creation] at the Rodaw Blog====
+==Software==
+===.Net micro framework===
+====[[ServoCentering]]====
+==BoeDuino-Bot.Net v1.1==
+Replaced top side battery pack with Parallax [http://www.parallax.com/StoreSearchResults/tabid/768/txtSearch/28988/List/0/SortField/4/ProductID/782/Default.aspx Boe-Bot Li-Ion battery pack] installed below chassis main deck.
+[[File:BoeDuino-Bot.NetLowProfile1wm.jpg|200px|thumb|none|BoeDuino-Bot.Net v1.1 Front view]]
+[[File:BoeDuino-Bot.NetLowProfile0wm.jpg|200px|thumb|none|BoeDuino-Bot.Net v1.1 Bottom view]]