Difference between revisions of "KF7CRU Tape Measure Yagi Antenna"

From Review or Discard at Will
Jump to: navigation, search
(Initial creation)
 
m
Line 15: Line 15:
  
 
[[File:TapeMeasureYagiParts.jpg|600px]]
 
[[File:TapeMeasureYagiParts.jpg|600px]]
 +
 
[[File:TapeMeasureYagiCrossTapeSecureDetail.jpg|600px]]
 
[[File:TapeMeasureYagiCrossTapeSecureDetail.jpg|600px]]
  

Revision as of 16:29, 3 September 2015

Tape Measure Yagi Antena

Resources

Antennas

Attenuators

Build

TapeMeasureYagiParts.jpg

TapeMeasureYagiCrossTapeSecureDetail.jpg

I used a short length of pipe to secure the tape in the T. Beveled the edges a bit to make it easier to start.

TapeMeasureYagiCrossTapeSecureCloseDetail.jpg

I used a short length of pipe to secure the tape in the T

TapeMeasureYagiBeam.jpg

Is this a straight enough beam element? Or should I use hose clamps. Thinking about turning it in my lathe to remove the pipe stop ridges inside to create a clear path.