BoeDuino-Bot.Net

From Review or Discard at Will

Revision as of 14:13, 4 December 2011 by Jeffa (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Contents

1 Prototype
- 1.1 Read this first blog post introducing dottie.
2 BoeDuino-Bot.Net v1.0
3 PCB Shield
- 3.1 Prototype
  - 3.1.1 Read about PCB creation at the Rodaw Blog
4 Software
- 4.1 .Net micro framework
  - 4.1.1 ServoCentering
5 BoeDuino-Bot.Net v1.1

Prototype

BoeDuinoBot.Net Dottie

Read this first blog post introducing dottie.

BoeDuino-Bot.Net v1.0

BoeDuino-Bot.Net v1.0

BoeDuino-Bot.Net v1.0

{{#ev:youtube|vtDHHEG7DwY}}

PCB Shield

Prototype

BoeDuino-Bot.Net PCB Top

Note the addition of resistors and servo power switch and LED indicator added after PCB etch.

BoeDuino-Bot.Net PCB Bottom

Read about PCB creation at the Rodaw Blog

Software

.Net micro framework

ServoCentering

BoeDuino-Bot.Net v1.1

Replaced top side battery pack with Parallax Boe-Bot Li-Ion battery pack installed below chassis main deck.

BoeDuino-Bot.Net v1.1 Front view

BoeDuino-Bot.Net v1.1 Bottom view

Retrieved from "https://wiki.rodaw.com/w/index.php?title=BoeDuino-Bot.Net&oldid=17"